Officially, Canadian astronaut Jeremy Hansen is part of the crew of the upcoming Artemis II flight around the Moon thanks to an agreement between NASA and the Canadian Space Agency which will see Canada build Canadarm 3 for the Lunar Gateway space station that is part of the Artemis program.
I also like to think of Hansen’s participation in Artemis II as being a belated recognition of Canada’s role in helping NASA get the Apollo astronauts to the Moon more than half a century ago.
While Canada did not play a formal part in Apollo, the Canadian government’s decision in 1959 to cancel the CF-105 Avro Arrow jet interceptor program led to NASA hiring 31 of Avro’s top engineers to join Project Mercury, which put the first U.S. astronauts into space in the early 1960s. The Avro engineers also played prominent roles in the Gemini spaceflights that followed Mercury, and Apollo itself. Some of the former Avro engineers went on to work in the Space Shuttle program and one worked on the International Space Station. Seventeen of the engineers had come to Avro Canada from the United Kingdom, one was from Poland, and 13 were Canadian.
Two of the most important members of the Avro group came from Canada. James A. Chamberlin had been born in Kamloops B.C. and raised in Toronto. When the Arrow was cancelled in 1959, he was the 43-year-old chief of technical design at Avro Canada, and once at NASA, he was named head of engineering for the Mercury spacecraft. Not long after President John F. Kennedy challenged NASA to send astronauts to the Moon, Chamberlin began designing a new two-man spacecraft called Gemini that would prepare astronauts and flight controllers for the challenges of Apollo’s flights to the Moon.
By the time Gemini got its official start in late 1961, NASA officials were engaged in a heated debate about how Apollo would get to the Moon. There were three concepts, starting with a direct flight in a single spacecraft to the lunar surface and back to Earth. A second proposal involved launching the spacecraft in parts using two or more Saturn V rockets, assembling the parts in Earth orbit, and then heading for the Moon. A third concept, called lunar orbit rendezvous, involved launching two spacecraft atop a single Saturn V rocket. The crew would spend most of the trip in a mother ship, and a second smaller craft would descend from the first craft in lunar orbit to the Moon’s surface, and then return the astronauts to the mother ship for the return trip home.
At first, most NASA officials charged with the lunar flight favoured a direct flight, in part because it would avoid the complexities of rendezvous and docking in lunar orbit or of assembling a spacecraft in Earth orbit. An engineer from another part of NASA named John C. Houbolt, campaigned within the agency for lunar orbit rendezvous, which he had concluded would save a massive amount of weight, fuel and cost because most of the spacecraft, such as the Earth landing system, would not have to be lowered to the lunar surface and then launched back to Earth. One of the first people to agree with Houbolt was Chamberlin, who quickly drew up a daring plan to fly a Gemini spacecraft to lunar orbit, along with what he called a “bug” that would carry a single astronaut to the surface and back to the Gemini. While NASA rejected Chamberlin’s idea of flying Gemini to the Moon, his proposal helped change minds at the space agency to favour flying Apollo to the Moon with lunar orbit rendezvous.
Another Canadian from Avro, Owen E. Maynard, a native of Sarnia, Ontario, had been involved in the Apollo program from its beginning in 1960. Maynard quickly began designing a two-man craft that became known as the lunar module or LM. Along with his drawings, Maynard travelled with other Apollo experts to NASA installations to sell lunar orbit rendezvous to the whole agency. NASA officially opted for lunar orbit rendezvous in July 1962, and in November, Grumman Aircraft won the contract to build the lunar module.
Maynard worked with Grumman’s engineering team under Tom Kelly on the LM, and in 1964 he was promoted to head the systems engineering division, where he was responsible for making sure that all of the components of the Apollo spacecraft worked in concert with the Saturn V rocket and the systems on the ground. Two years later, Maynard was moved to the top job in Apollo mission operations. There he was responsible for designing missions and for setting the sequence of Apollo test flights that led to the first lunar landing attempt on Apollo 11.
The fire that killed Apollo 1 astronauts Virgil Grissom, Edward White and Roger Chaffee during a launch pad test in 1967 led to many changes in Apollo, including a management shakeup that saw Maynard returned to his previous job as head of systems engineering. He played a key role in the missions that led to the lunar landing, notably Apollo 8, which orbited the Moon 10 times in December 1968 with three astronauts on board. During the flight of Apollo 11, Maynard was one of the managers working in the Mission Control Center in Houston. In the time leading up to Apollo 11, Chamberlin served as a trouble shooter for NASA management.
Several other engineers from Avro Canada also made their mark on Apollo. Bryan Erb, an Albertan, helped develop the Apollo command module’s heat shield and then managed the laboratory that handled the returned lunar samples. When the Apollo 11 crew returned to Earth, the first person who greeted them on board the recovery helicopter was a Canadian physician, Dr. William Carpentier, who joined NASA after an upbringing in Alberta and B.C. Two natives of Saskatchewan worked on spacecraft systems – Leonard Packham on communications, and Richard Carley on guidance and navigation. Robert Vale of Toronto helped develop the experiment packages that the Apollo astronauts deployed on the lunar surface. British engineers who worked at Avro Canada had leading roles in Apollo, including John Hodge, Rod Rose, Peter Armitage, Morris Jenkins and Dennis Fielder.
Apollo 11 and five other Apollo missions took astronauts to the surface of the Moon. Each lunar module descent stage and its landing gear included four legs and struts that extended and supported the legs. Most of the landing gear, except for the bottom parts of the legs and the landing pads, were precision made at Héroux Machine Parts Limited (now Héroux-Devtek) in Longueuil, Quebec.
I had the privilege of meeting most of the Avro engineers who worked for NASA while writing my book, Arrows to the Moon: Avro’s Engineers and the Space Race (Apogee Books: 2001).
By the time Apollo was wrapping up in 1972, NASA was negotiating with the Canadian government to make Canada a formal partner in the Space Shuttle program by contributing the Space Shuttle Remote Manipulator System or Canadarm to the shuttle. In 1983, at NASA’s invitation, Canada selected its first astronauts and Marc Garneau became the first Canadian to fly in space in 1984.
Now Jeremy Hansen stands to be the first Canadian to fly around the Moon, following in the footsteps of other Canadians who worked in the design suites, meeting rooms and control centres of Apollo, and his Canadian astronaut colleagues who flew on board the Space Shuttle and the International Space Station.
No comments:
Post a Comment